MENU

An Example of a Great Repair Request

Have you ever wondered what goes on before I take on a project to repair?

Before I accept an item to fix, I like to have a dialogue with clients about the piece, their goals, and my ability. All of this starts with the Repair Request I have on my Contact Me Page.

So what makes a good repair request? I often have to clarify to potential clients what I need to come up with an accurate estimate to repair the item they’d like me to work on. When you, the client, fills out our contact form, it asks you a series of questions such as:

  • How important is matching color or matching fiber content?
  • How important is it to you that the repair be machine washable vs. needing to be washed by hand?
  • How are you intending to use the item?
  • How fragile does the fabric appear?
  • How important to you is cost?
  • How important is it for you to preserve as much of the textile as possible?

When you answer these questions, they help me understand where your priorities lie in the the repair. Some repairs can be functionally stable, but the color or fiber content might not be the best match. Finding a good color match can be time consuming – are you willing to reimburse me as I purchase different yarns to find the best match for the repair? If you are intending to put the item on display vs use it everyday, that may influence how much of the object needs to be repaired – daily use means I should also prioritize areas I see are going thin, because with more use they may easily become holes soon.

One of the best ways I can get a sense of the item (aside from sending it to me) is to take good photographs. Take a look at the photos below as I show what was really helpful about them.

This is a great overall photo of the piece. I can see the pieces of paper that mark the holes, and I know where the holes are in relation to each other. It gives me a sense of the scale of the piece, the overall pattern, and if there are any edgings or other factors I have to take into account while working.

Great photo with a number. The ruler provides a lot of detail for me: I can tell the size of the yarn and how big the hole is. The hole is filling enough of the frame that I can zoom in to look at how the fibers are worn away (ie: frayed, cut, ragged).

Again, the ruler is super helpful. I can also tell the customer had their hands on either side stretching the fabric slightly so I could see everything.

So helpful to have number 3 and 4, which are close together, numbered! In cases where holes are close together, the location of the holes can impact how I approach the repairs, so it’s helpful to see that relational information.

Here the hole was small enough that I couldn’t see it in the overall picture, but can see it here. It was so helpful!

 

One of the other things this client did was mark each hole with a piece of string. This really saves both of us time. While sometimes people don’t realize there is a hole that I catch, the time it takes for me to find holes that the client already knows about is time I could use on doing repairs. Ultimately it saves us both time, and in the end, the client money.

Got a piece you’d like me to look at? Now that you have a sense of what I’m looking for, head over to Let’s Connect, and get the conversation started.

Re-Imagining A Crochet Tablecloth

IMG_20200930_143126

Getting creative with clients to turn a piece from something that can’t be used to something that can is one of my favorite types of collaborations.

This tablecloth had major damage around various part of the outer edge. However, like many crochet pieces, this one was modular – both in that the motifs used could be pulled out and put other places, and that each round of motifs and edging was not dependent on the last piece.

The first step for me was laying the piece out so I could take a careful look and mark and note the places that needed attention. There’s the obvious two holes along the edge, but there were also multiple smaller places that would need attention and reinforcement too.

The client preferred to be able to use the piece – no matter that we’d have to take off quite a bit of the outer edging. We could then use it as a table runner instead of a table cloth.

IMG_20201001_072929_598

After taking a good close look at the piece, and multiple conversations with the client, we determined the place where we could take the least off. I’d still need to repair some small areas, but we had reduced the amount of work to something that was in the client’s budget.

IMG_20201001_072944_674

Taking the edging off involved the use of a sharp pair of scissors and some time where I didn’t need to be interrupted. There was no room for mistakes! After several hours of carefully removing the outer edge, it was time to take a step back, take some pictures and consult with the client again.

PANO_20201001_210520.vr

Here we have the piece with the edging taken off – it really changed the appearance and presentation of the finished product. I think the cleaner unadorned edge gives it a bit more of a formal and modern look.

IMG_20201001_210456

A quick and light steam press, shoring up some of the other areas, and it was ready to be sent on its way!

Preparing a Hole For Swiss Darning in a White Knit Throw

One of the first steps when I get a piece is an initial evaluation to make sure everything is ready to be worked on.  It always helps when clients secure stitches and mark the areas that need to be worked on.  In this paticular case, a hole had developed in a supremely soft knit afghan… clearly it needed repairing to be used this winter!  I feel like the end of 2020 has been a year of wanting to snuggle under a blanket, especially as in the Northern Hemisphere it’s getting cold.

hole in white knit throw held together with safety pins

hole in white knit throw held together with safety pins

[Read more…]

Challenges in Restoring Crochet Rag Rugs

teal sheet fabric against damaged rag rug

Normally I’m all about the yarn, but the most recent repair I’ve been working on is a set of three crochet rag rugs.  Restoring these pieces took some real inguenuity and creativity, as I worked with the client to come to a solution.  Let’s take a look at these three lovely rag rugs, and how we approached repairing them for further use!

These rugs started out with some pretty significant damage.  Because they were made out of rags, some of the more delicate fabrics had worn out quickly, while much of the rug was still in really good shape.  I thought when the client first sent picture that the rugs were made out of quilting cotton, but it became apparent once I had a them in my hands that the quilts were made from garments – most notably, men’s button up shirts. [Read more…]

Reweaving and Grafting a Green and Gold Asymetrical Shawl

It seems like the entire fall has been consumed with white sweaters: I had three repairs of Irish Knit sweaters in a row, which is one of the more boring things to write about.  But my latest repair is a lovely green and gold shawl that I thought was paticularly interesting, and I thought I’d share it here in addition to writing about it on Instagram.

This piece had five rows of stitches ripped into a hole: it had caught on something (dryer? door?) and gotten the hole. Being that it was in the colors of the client’s daugther’s team, it needed to be repaired.

This is one of the repairs that is just a joy to work on: the client, D, had sent the piece to me with the loose stitches still on locking stitch markers.  She had taken my Darn It class with me at Rhinebeck, so she knew the drill: catch the stitches so they don’t drop and make the hole bigger.  It meant I could dive right into the repair without having to fish around ladering the stitches back into place.  (Which, have I mentioned lately that my Darn It class is both on Interweave and Craftsy?)

It was time to get to work.

Garter stitch is one of the prime times where I like to use a single long-ish strand of the repair yarn if I can.  While many of the orional techniques of doing swiss darning call for a new strand of yarn on each row, I find that leaves a lot of ends to weave in, and can make the fabric very dense in those areas.  Trying to keep the ends pretty short, I only opened up the hole a little, working duplicate stitch along the sides and then knitting across the hole before moving up to the next row.  I did that for the first few rows, and then grafted the last row together.

recently rewoven hole in garter stitch shawl in green and gold, threads are still visibleThen it was time to weave in the ends.

 

I feel like often most of the attention I give to pieces is the process of repairing the hole, which is important!  But, I find it equally as satisfying to weave in the ends – that’s when a hole is truly repaired.  I feel like sometimes garter stitch can be a little tricky to weave in all the ends, so I chose to split the yarn into smaller strands to try and hide the ends a little better and keep the fabric from getting too thick where the old and new yarn overlapped.

green and gold shawl with recently darned and rewoven hole

Finally, it was time to fuss with the tension to make sure that everything was laying flat and even.repaired hole in green and gold garter stitch shawl marked by waste yarn

A blast of steam to “convince” the newly woven in ends that they should stay where I put them, and this piece was ready to send in the mail.  A satisfying way to leave things!

Mending a Midwest Inspried Crochet Afghan

This midwest inspried afghan had a lot of damage done to it over the years, and the owner contacted me about doing some repairs and mending to bring it back up to shipshape! This was an interesting piece – each row was done through the back loop (hence the distinct ridges, and each row the yarn was cut on the end, resulting in the creator only ever going from right to left when working on it.  The cut ends became part of the fringe.

It did make the repairs a lot easier to do, as I didn’t need to flip the blanket over for each row. Working through the back loop does mean that the last row invoves a lot of sewing, though.

The two holes right above the the black line were so close together it made more sense to pull out the yarn between them and work them as one large hole. I decided to tackle that first.

To keep track of each stitch, I used locking stitch markers to hold each leg of the single crochet together.  This will help when I reweave the last row. 

Nearly done! After working each of the rows, I’m finishing up by joining together the last row. I had to take out the black row later in the process as it had more damage to it than I realized.

Finally Done!

Now I’ve got everything worked up and the ends woven in. I mark each area of repair with a piece of yarn, so the repairs are easier to find. When the clients get the repaired piece they can take the markers out.

See that the stitches look a little more lively where I’ve done the repairs? This will improve as the piece gets used, and the newer stitches gain some wear.

Now I’m tackling the repair that is further up in the blanket. You’ll notice there’s the larger hole, and to the left, another smaller hole. It made sense in this case to also pull out and combine the holes. The yarn in between the two holes was worn away enough that I was concerned about its stablility.

As in many repairs, this is a slow process of just adding the new yarn to the old, crocheting across the row, and then sewing and reweaving the old to the new.  What you can’t see on the backside is all the ends I still need to weave in.

And now we’re at the end: the hole is closed up and the ends are woven in.  A bit of yarn to mark the spot.  Now it’s time for this afghan to have a quick wash before it leaves to go back to its owner.

Recent Repair of a Knit Afghan

Now that I’m getting back into the swing of things, I wanted to document a unique repair that I worked on.  This 52-year old afghan was in need of some TLC before it got handed off to the next generation.  Working with this piece was a true pleasure, with the yarn in remarkably good condition for it’s age.  The afghan was a huge ripple pattern, with 9 panels joined together by intarsia.

INTARSIA. Think about that… it wasn’t seamed.  It was 9 balls of yarn that were worked on at the same time across the blanket.

But back to the repair!  There were several holes – mostly along the edge where ends had worked loose, but also one spot in the center of the piece.

[Read more…]

Much Beloved Heirloom Crochet Tablecloth Made New

rectangular lace crochet tablecloth with center border and then outer border made up of flower motifs

rectangular lace crochet tablecloth with center border and then outer border made up of flower motifs

One of my favorite repairs, recently, has been a series of two different crochet lace tablecloths I took on.  These two pieces were both at least 30 or more years old, and were in pretty good condition.  Frank from Textile Restoration Inc in Chicago had sent the client my way.  I’ll highlight the first of the tablecloths today, and I’ll be highlighting the second of them a little later.

The first tablecloth, which I thought of as “Field of Flowers” when I worked on it, was a huge piece, at least 5 1/2 feet by 4 feet.  It was made of a center pannel of 4 x 12 motfs, an inner border of triangles, an outer set of motifs 4 deep, and then larger second outer border.

Most of the holes were areas where motifs that had been joined as the tablecloth was worked had come undone and unraveled – not uncommon, even in pieces where every single end is tightly woven in.  The areas where two motifs join together tend to be an area that recieves more stress.

[Read more…]