MENU

Crochetscene 2015: Crossed Arrow Vest

Photo Credit: Interweave/Harper Point Photography

This week I’m focusing on my three patterns released in Crochetscene 2015!  I had the honor of getting all three of my design submissions accepted – and it was so exciting to work on these three designs.  Today I’m focusing on Crossed Arrow, a Hunger-Games inspired vest that’s accessible to beginning crocheters.  With minimal seams and simple shaping, the most challenging part is the edging – and broomstick is an easy skill to learn!

My Sketch for Crossed Arrow

I had the concept of how the vest was put together from the start; although my drawn picture here only gives you a little bit of an idea.  I had been immersed in the future/punk look of a few different shows, and I had just come off of a bunch of fine work in both knitting and crochet – I was ready for a bulky vest that worked up quickly and looked a lot more complicated than it was.  Crossed Arrow was the result.

I’d also been wanting to create a couple of pieces featuring things like broomstick – things that would introduce crocheters to the skill without making the whole project about the skill.

I love that Crossed Arrow is simple – the vast majority of the project is single crochets through the back loop.  Occasionally you crochet to create an armhole, and in the beginning and the end you work increases or decreases for the neckline.  But mostly?  It’s just using one of the foundation stitches of crochet to a really great effect.

Hairpin lace edging on Crossed Arrow

Hairpin lace edging on Crossed Arrow

For me, it’s the details of the piece that make it – specifically, the broomstick lace edging.  Look at the picots!  Look how the rest over the edges!

Crossed Arrow is currently available in print or online in Crochetscene 2015.  You can also read my more personal notes about the pattern on Ravelry.

Time Travler

Time Traveler released early last week, but I’m only now getting to talk and share it with you!  It’s a pattern based off of a historical knitting pattern (which is a secret love of mine).  But, I digress!  Let me give you the deets:

Time Traveler
by Jennifer Raymond

Published in: Sockupied, Fall 2014
Craft: Knitting
Category: Feet / Legs → Socks → Mid-calf
Published: July 2014
Suggested yarn: Hazel Knits Artisan Sock
Yarn weight: Fingering / 4 ply (14 wpi)
Gauge: 32 stitches and 46 rows = 4 inches in stockinette stitch
Needle size: US 0 – 2.0 mm
Yardage: 400 yards (366 m)
Sizes available: 7 (8½, 9½)” (18 [21.5, 24] cm) foot circumference and 8½ (9¾, 10¾)” (21.5 [25, 27.5] cm) long from back of heel to tip of toe; foot length is adjustable.

Jennifer updated a stitch pattern from a vintage book to create a new twist in simple lace socks. The zigzag effect is found in many vintage patterns, but also feels right at home in these everyday socks.

Buy Here: http://www.interweavestore.com/sockupied-fall-2014-emag-for-mac-and-pc

It’s Official: Octopodes, my pattern in Knitty, is out!

I can finally share the exciting news!  Octopodes is my latest pattern, published in Knitty.  I am so excited to share the news – I’ve been holding onto it for what feels like forever!
As a thrilling addition, there will be an Octopodes KAL starting on March 24th, hosted in Dragonfly Fiber’s Ravelry Group (they’re the ones who provided the delicious yarn!).  There are going to be prizes!  I’ll be doing a series of blog posts and tutorials to go along with the KAL (and there may be some other exciting things in regards to the KAL coming up)!  Stay tuned for more information, or sign up for the newsletter and get the information delivered straight to your inbox.
If you love the design, please share it on Facebook, Ravelry or Twitter – spread the word!
The Details:
Octopodes
by Jennifer Raymond
Craft: Knitting
Category: Feet / Legs → Socks → Mid-calf
Published: March 2014
Yarn weight: Fingering / 4 ply (14 wpi) Information on yarn weights
Gauge: 36 stitches and 36.5 rows = 4 inches in In Stranded Colorwork
Needle size: US 1 – 2.25 mm
Yardage: 226 – 442 yards (207 – 404 m)
Sizes available: XS[S, M, L, XL]
 This pattern is available for free.

New Pattern: Larkin


Larkin

by Jennifer Raymond

Published in:  Homestead by Classic Elite Yarns
Craft: Knitting
Category: Sweater → Pullover
Published: March 2014
Yarns suggested: Classic Elite Yarns Meadowlark
Yarn weight: Worsted / 10 ply (9 wpi) Information on yarn weights
Gauge: 17 stitches and 25 rows = 4 inches in Stockinette stitch
Needle size: US 8 – 5.0 mm
Yardage: 550 – 990 yards (503 – 905 m)
Sizes available: XS (S, M, L, XL)

This pattern is available for $6.00 USD
 buy it now or   visit pattern website
A pullover with lace patterning on the front, pleated sleeve caps, and a no-finish round neckline.

Skill Level: Experienced

Sizes: XS (S, M, L, XL). Shown in size XS.

Finished Measurements: Bust: 32 (36, 42½, 45, 48)”
Length: 23 (24, 25, 25¾, 26¾)”

Yarn: Meadowlark by Classic Elite Yarns (50% silk, 30% linen, 20% viscose; 50 g = 110 yards) 5 (6, 7, 8, 9) hanks 1554 Aquamarine

Other Materials 
Stitch markers
Removable markers or safety pins
Sewing pins

Gauge
17 sts and 25 rows = 4” in St st and Flame patt from
charts. Take time to save time, check your gauge.

For more information, see: http://www.classiceliteyarns.com/pattern_detail.php?patternID=283

New Pattern: One Salt Sea

by Jennifer Raymond

Published in: Tinking Turtle Designs
Craft: Crochet
Category: Neck / Torso → Scarf
Published: October 2013
Yarns suggested: Three Irish Girls Glenhaven CashMerino Sock
Yarn weight: Fingering / 4 ply (14 wpi) Information on yarn weights
Hook size: 3.75 mm (F)
Yardage: 200 – 300 yards (183 – 274 m)
Sizes available: 14″ x 68″, blocked. May be worked longer.

This pattern is available for $5.00 USD

One Salt Sea is a great first hairpin lace project. Each strip that makes the scarf is short and sweet – no marathon strips to join together! If you’ve never done hairpin lace crochet before, don’t worry – this pattern walks you through the whole thing.

This scarf works up quickly – even in sock yarn! Work the strips and join as you go, or wait until the end to join them. It’s a great introduction to hairpin crochet.

Totem

The official description: To work with the color shifts of handpainted yarn, Totem uses a type of slipped stitch in a geometric pattern that resembles the monumental cedar sculptures. A lateral braid creates the illusion of knit stitches rotated 90°.

Published in: Sockupied, Spring 2013
Craft: Knitting
Category: Feet / Legs → Socks → Mid-calf
Published: January 2013
Yarns suggested: Three Irish Girls Adorn Sock
Yarn weight: Fingering / 4 ply (14 wpi)
Gauge: 39 stitches and 52 rows = 4 inches
Needle size: US 1½ – 2.5 mm
Yardage: 430 – 600 yards (393 – 549 m)
Sizes available: 5 3/4, 7 1/2, 8 3/4″ circumference and 8 1/2, 10 1/4, 11 3/4″ long
This pattern is available for download for $7.99.

Ravelry Link

FINISHED SIZE 5¾ (7½, 8¾)” (14.5 19, 22 cm) foot circumference and 8½ (10¼, 11¾)” (21.5 26, 30 cm) long from back of heel to tip of toe; to fit women’s U.S. shoe size 6½ (8½, 10½). Socks shown measure 7½” (19 cm).

Notes: To accommodate a deep heel or high instep, you may choose to add additional stitches before the heel in the mini-gusset section, then decrease them in the purl column in the beginning of the leg.

If your foot circumference is larger (or smaller) than your ankle circumference, you may cast on more (or fewer) stitches in the foot section and decrease (or increase) as needed in the columns of knit stitches that divide the front and back of the sock.

Debating if the pattern is right for you?  Got questions?  This is the place to ask them!